miniature eseries features 8 current ratings ac 3 current ratings dc choice of actuator styles choice of terminals 3 contact arrangements long-life coil spring mechanism agency approved extended life versions high-temperature versions available specifications electrical temperature rating: -40 to +85 c (130? and 150? optional, except e36) flammability rating: ul94hb materials case: general purpose phenolic actuating button: thermoplastic acetal common terminals: silver-plated brass (e21, e22, e23, e31, e33, e34, e35) silver-plated copper (e36) no & nc terminals: brass (e21, e22, e23, e31, e33, e34, e35) copper (e36) moving blade: brass (e21, e22, e23) silver-plated beryllium copper (e31, e33, e34, e35, e36) spring: stainless steel auxiliary actuator: cold-rolled steel (nickel-plated) (except e21 and e22 ?aluminum) roller: sintered stainless steel contacts: silver alloy (except e21 and e31 ?gold crosspoint) stainless steel spring thermoplastic actuating button phenolic case silver alloy or gold crosspoint contacts common terminal nc terminal no terminal (e34 and e35 only) electrical ratings electrical life at rated load switch according to vde according to ul series en61058 rating ul1054 rating (min. operations) (min. operations) e21 n/a 0.1a, 125vac (0.25a, 30vdc optional) n/a 6,000* e22 n/a 3a, 125/250vac n/a 6,000 1/10hp, 250vac (0.1a, 125vdc optional) e23 n/a 5a, 1/4hp, 125/250vac n/a 6,000* e31 n/a 1a, 125vac n/a 6,000* e33 n/a 10a, 1/2hp, 125/250vac (6a, 30vdc optional) n/a 6,000* e34 n/a 15a, 1/2hp, 125/250vac n/a 6,000* e35 n/a 20.1a, 1/2hp, 125/250vac n/a 6,000 e36 n/a 25a, 125/250vac; 1hp, 125vac n/a 6,000 2hp, 250vac *indicates 100k life available. 39
40 0.406 (10.31 0.015 0.38) + - + - 0.250 (6.35) 0.250 (6.35) 0.125 (3.16) 0.020 (0.51) thk x 0.187 (4.75) wide q.c. terminal 0.797 (20.24 0.010 0.25) + - + - 0.625 (15.88 0.015 0.38) + - + - 0.406 (10.31) 1.093 (27.76 0.015 0.38) + - + - 0.875 (22.23) 0.110 ( 2.79 ) 0.122 (3.10) dia. 0.234 (5.94) 0.087 (2.21) 0.110 (2.79) 0.106 (2.69) reference line 0.397 (10.08 0.015 0.38) + - + - 0.110 ( 2.79 ) 0.122 (3.10) 0.120 ( 3.05 ) 0.132 (3.35) x 0.110 (2.79) 0.465 (11.81) com n.c. n.o. 0.035 (0.89 0.020 0.51) + - + - 0.050 (1.27) dia. 0.109 (2.77) 0.750 (19.05) max. rest 1.382 (35.10 0.031 0.79) + - + - 0.580 (14.73 0.045 1.14) + - + - operating position actuation line 0.960 (24.38) max. rest 1.289 (32.74 0.031 0.79) + - + - 0.786 (19.96 0.045 1.14) + - + - operating position actuation line com com n.c. n.o. n.c. n.o. actuator specifications standard force max. operating force (gms.) maximum operating minimum max. movement actuation pre-travel point * over-travel differential length ** actuator switch e21, e23, inches inches inches inches inches type type e22 e31 e33 e34 (mm) (mm) (mm) (mm) (mm) 00a 75 170 285 400 0.047 0.5780.020 0.050 0.010 (1.19) (14.680.51) (1.27) (0.25) 00h 75 170 285 400 0.062 0.6000.020 0.050 0.016 0.865 (1.57) (15.240.51) (1.27) (0.41) (21.97) 50h 35 86 144 200 0.125 0.6000.045 0.085 0.030 1.400 (3.18) (15.241.14) (2.16) (0.76) (35.56) 50hl 20 51 86 120 0.220 0.6000.075 0.130 0.040 1.580 (5.59) (15.241.91) (3.30) (1.02) (40.13) 00k 75 170 285 400 0.047 0.8060.030 0.040 0.010 0.810 (1.19) (20.470.76) (1.02) (0.25) (20.57) 50k 35 86 144 200 0.125 0.8060.045 0.085 0.030 1.340 (3.18) (20.471.14) (2.16) (0.76) (34.04) 50kl 25 51 86 120 0.200 0.8060.075 0.120 0.040 1.516 (5.08) (20.471.91) (3.05) (1.02) (38.51) 50p 35 86 144 200 0.125 1.0450.045 0.085 0.030 1.340 (3.18) (26.541.14) (2.16) (0.76) (34.04) 50n ? 35 86 144 200 0.175 0.6000.045 0.065 0.030 1.382 (4.45) (15.241.14) (1.65) (0.76) (35.10) 90n ? 35 86 144 200 0.125 0.7930.058 0.085 0.030 1.289 (3.18) (20.141.47) (2.16) (0.76) (32.74) *measured above reference line. refer to dimensional drawing above. **actuator tolerance 0.031 inches (0.79mm). ? only available with 85 c temperature rating. note: e35 and e36 not available in standard force. see miniature e series light force for ordering information. suffix numbers shown represent switch with 0.187 (4.75mm) terminals. specifications subject to change without notice. dimensions standard force inches (mm) part number suffix 50n part number suffix 90n mounting standard force recommended mounting screw size: #4-40 round head. recommended torque on screw: 3 inch lbs. max. ordering information select the current rating you need. combine the corresponding series/prefix number with the appropriate suffix number for the switch type, circuitry and terminals you require. circuitry standard force contact arrangement available in choice of single pole double throw or single pole single throw, either normally open or normally closed. in general normally open may be specified by changing suffix number from 00 to 01 and normally closed by changing suffix number to 02. n.c. n.o. n.c. n.o. n.c. n.o. n.c. n.o. 0.234 (5.94) 0.234 (5.94) 0.234 (5.94) 0.234 (5.94) 0.187 (4.75) 0.250 (6.35) 0.099 (2.51) dia. hole screw terminals q.c. solder short solder 0.240 (6.10) terminals standard force choice of screw, solder or two quick connect terminals. note: 0.187 quick connect terminals are standard. normally, to order screw terminals add 10 to suffix number. to order solder terminals add 20 to suffix number and to order 0.250 q.c. terminals add 40 to suffix number. terminal spdt spst no spst nc qc 0.187 00a 01a 02a screw 10a 11a 12a solder 20a 21a 22a short solder 30a 31a 32a qc 0.250 40a 41a 42a switch mounting hole actuation length 0.177 (4.50) 0.355 (9.02) standard ratio high ratio actuators standard force many special forms and lengths of actuators are available. standard type integral hinged lever and roller actuators are available in choice of 2 mounting positions. actuation lengths are dimensioned from centerline of switch mounting hole as shown.
41 0.406 (10.31 0.015 0.38) + - + - 0.250 (6.35) 0.250 (6.35) 0.125 (3.16) 0.020 (0.51) thk x 0.187 (4.75) wide q.c. terminal 0.797 (20.24 0.010 0.25) + - + - 0.625 (15.88 0.015 0.38) + - + - 0.406 (10.31) 1.093 (27.76 0.015 0.38) + - + - 0.875 (22.23) 0.343 (8.71 0.015 0.38) + - + - 0.550 (13.97 0.015 0.38) + - + - 0.113 ( 2.87 ) 0.116 (2.95) dia. 0.234 (5.94) 0.087 (2.21) 0.109 (2.77) 0.106 (2.69) reference line 0.397 (10.08 0.015 0.38) + - + - 0.112 ( 2.85 ) 0.116 (2.95) x 0.126 (3.20) 0.109 (2.77) 0.291 (7.39) com n.c. n.o. 0.050 (1.27) dia. 0.207 (5.27 0.015 0.38) + - + - 0.109 (2.77) 0.750 (19.05) max. rest 1.382 (35.10 0.031 0.79) + - + - 0.580 (14.73 0.045 1.14) + - + - operating position actuation line 0.960 (24.38) max. rest 1.289 (32.74 0.031 0.79) + - + - 0.786 (19.96 0.045 1.14) + - + - operating position actuation line com com n.c. n.o. n.c. n.o. actuator specifications light force maximum max. operating force (gms.) maximum operating minimum movement actuation pre-travel point * over-travel differential length ** actuator switch e21, e23, inches inches inches inches inches type type e22 e31 e33 e34 e35 e36 (mm) (mm) (mm) (mm) (mm) 00ax 15 45 75 100 0.047 0.5780.020 0.050 0.010 (1.19) (14.680.51) (1.27) (0.25) 00hx 15 45 75 100 0.062 0.6000.020 0.050 0.016 0.865 (1.57) (15.240.51) (1.27) (0.41) (21.97) 50hx 8 22 37 50 0.125 0.6000.045 0.085 0.030 1.400 (3.18) (15.241.14) (2.16) (0.76) (35.56) 75hx 5 14 22 30 0.220 0.6000.075 0.130 0.040 1.580 (5.59) (15.241.91) (3.30) (1.02) (40.13) 50kx 8 22 37 50 0.125 0.8060.045 0.085 0.030 1.340 (3.18) (20.471.14) (2.16) (0.76) (34.04) 75kx 5 14 22 30 0.200 0.8060.075 0.120 0.040 1.516 (5.08) (20.471.91) (3.05) (1.02) (38.51) 55hx 4 10 17 22 0.300 0.6000.100 0.187 0.065 2.757 (7.62) (15.242.54) (4.75) (1.65) (70.03) 85hx 2 6 10 13 0.500 0.6000.175 0.312 0.100 2.932 (12.70) (15.244.45) (7.92) (2.54) (74.47) 50nx ? 8 22 37 50 65 112 0.175 0.6000.045 0.065 0.303 1.382 (4.45) (15.241.14) (1.65) (0.76) (35.10) 90nx ? 8 22 37 50 65 112 0.125 0.7930.058 0.085 0.030 1.289 (3.18) (20.141.47) (2.16) (0.76) (32.74) 40ax 120 220 0.070 0.5570.020 0.035 0.010 (1.78) (14.150.51) (0.89) (0.25) *measured above reference line. refer to dimensional drawing above. **actuator tolerance 0.031 inches (0.79mm). ? only available with 85 c temperature rating. note: suffix numbers shown represent switch with 0.187 (4.75mm) terminals. specifications subject to change without notice. dimensions light force inches (mm) part number suffix 50nx part number suffix 90nx mounting light force recommended mounting screw size: #4-40 round head. recommended torque on screw: 3 inch lbs. max. ordering information select the current rating you need. combine the corresponding series/prefix number with the appropriate suffix number for the switch type, circuitry and terminals you require. circuitry light force contact arrangement available in choice of single pole double throw or single pole single throw, either normally open or normally closed. in general normally open may be specified by changing suffix number from 00 to 01 and normally closed by changing suffix number to 02. n.c. n.o. n.c. n.o. n.c. n.o. n.c. n.o. 0.234 (5.94) 0.234 (5.94) 0.234 (5.94) 0.234 (5.94) 0.187 (4.75) 0.250 (6.35) 0.099 (2.51) dia. hole screw terminals q.c. solder short solder 0.240 (6.10) terminals light force choice of screw, solder or two quick connect terminals. note: 0.187 quick connect terminals are standard. normally, to order screw terminals add 10 to suffix number. to order solder terminals add 20 to suffix number and to order 0.250 q.c. terminals add 40 to suffix number. exception: when ordering 55hx, 75hx, 75kx or 85hx switches with screw, solder or 0.250 terminals, consult factory. terminal spdt spst no spst nc qc 0.187 00ax 01ax 02ax screw 10ax 11ax 12ax solder 20ax 21ax 22ax short solder 30ax 31ax 32ax qc 0.250 40ax 41ax 42ax *e35 and e36 only available with 0.250 (6.35) terminals. switch mounting hole actuation length 0.177 (4.50) 0.355 (9.02) standard ratio high ratio actuators light force many special forms and lengths of actuators are available. standard type integral hinged lever and roller actuators are available in choice of 2 mounting positions. actuation lengths are dimensioned from centerline of switch mounting hole as shown.
|
